1 - Assemble the elements and tools.
Laser assembly
screw driver
wire cutters and pliers
glue gun
tape
tactical light
Viewed: 143 times.
|
2 - Disassemble the light by removing the battery cover and the 5 screws
Viewed: 147 times.
|
3 - Remove the slide stop
Viewed: 126 times.
|
4 - Remove the light assembly, battery box and switch as a block.
Viewed: 135 times.
|
5 - The existing LED is attached to a circuit board. If you are just changing the LED you want to remove the 2 screws holding this board, desolder the old LED and solder in a new one.
Viewed: 123 times.
|
6 - Circuit board removed.
Viewed: 122 times.
|
7 - Now desolder the red and black wires from the battery pack and switch.
Viewed: 121 times.
|
laser-1-8.jpg
Viewed: 116 times.
|
laser-1-9.jpg
Viewed: 119 times.
|
laser-1-10.jpg
Viewed: 114 times.
|
8 - Attach the black lead from the laser to the terminal on the battery pack and solder.
Viewed: 119 times.
|
laser-1-12.jpg
Viewed: 131 times.
|
